Hello, My name is George Robles. I have been posting videos on YouTube about My Geeetech Prusa i3 Pro B ( which I bought from Geeetech directly. I have been learning as I go but, I’m first going to do a little rambling so you know a little about me. i have extensive training in many fields (audio/ video service tech when I was in seventh grade, CNC machine operator at 18 and became a service tech for all machinery in the facility, at 21 I was back in school for airframe/(31 )powerplant tech. And keep going back for more in other fields, currently doing rv refrigerator refurbishing and 3d printing and any cars that crossed my paths) as well as the ability to understand anything mechanical, “how a machine works” is a fun puzzle to figure out, and will lead me to sometimes taking apart something I just bought (usually only if i don’t buy the the extended warranty) just to see how it works and see if I’m right or wrong about how it works and learn about it. i can learn just about anything from just watching another person, and become almost an expert if i’m allowed to ask questions. Yes, i know that sounds a little big headed but if you knew me in person you would understand. most of the people who know me know of my skills, i will stop by to visit a friends house and to open the gate was hard so, i just took ten seconds to bend a bar back in place and put it in the correct position. i do a lot of electrical work for them or what ever the job may be, yyyyYYYAAAYYyyy. I mean What ever you can do to help is great but, you never get what your worth. its different when you go help someone on the side of the road or really in need of help. yes, i actually do that. one case a guy just needed to barrow my tools for a few minutes and take apart his valve heads. anyways, i never like to brag or boast about myself but, i have to in a way on here so you know where i’m coming from and some of my skills. I can “multi-think”, is what i call it cause my vocab is small and i don’t have the best grammar, i can’t spell for crap, and to top it off i finger type so, i can think of a few things at the same time, usually when i’m fixing something. i will think of something i have to make and i will do several parts to the project at once, comes in handy when trouble shooting something, get my drift?
Now that i have said something about myself you can also check me out on google+: https://plus.google.com/+georgeroblesjr/posts/p/pub
or on my YouTube Channel: http://www.youtube.com/user/georgeroblesjr
If you would like to download my setup for Arduino 1.0.1 (Sanguinololu boards options already installed), Repetier Host, Firmware for Sanguinololu 1.4, and Firmware for GT2560 (Ramps 1.4 Coming, Soon) check out the link(s) below:
Arduino 1.0.1 Sanguinololu options installed:
Geeetech Prusa i3 Pro B 3D printer Firmware for Sanguinololu 1.4:
Geeetech Prusa i3 Pro B 3D printer Firmware for GT2560:
Geeetech Prusa i3 Pro C 3D printer Firmware for GT2560: https://drive.google.com/file/d/0By4eDcyqoOSudlNMS3doem50ZDQ/view?usp=sharing
Geeetech Prusa i3 Pro B & Pro C 3D printer Firmware for GT2560 REV A board that need a different firmware to fix the issue with the extruder(note, this is from Geeetech directly and will need some adjustments like the steps per min from 105 to 95 steps for the e axis which I’m working on and will post soon:
No longer here, see next blog.
Geeetech Prusa i3 Pro B 3D printer with auto-level servo/micro switch Firmware for RAMPs 1.4:
Geeetech Prusa i3 Pro C 3D printer Firmware for RAMPs 1.4:
Geeetech Prusa i3 Pro C 3D printer with auto-level servo/micro switch Firmware for RAMPs 1.4:
Repetier Host Geeetech:
Arduino 1.0.1 with u8glib – support for the LCD12864 full graphics LCD as well as support for the Sanguinololu board.
(Marlin is the picture you will see. I will get one to display something else when I can).
I mainly provided this to help those with printers bought from Geeetech as I’m working to be there US rep. but, should work for anyone with the same general setup. If your interested in buying a 3d printer or other items check out my online store: georges3dprinters.com Store is just being built so its not complete yet but will be soon.
If your interested in the same printer and would like one yourself, send me an email to the address below.
Here you’ll find links to my slicer config. just import the config from your slic3r / file /tab.
0.1 Layers, 0.42 wide “wall” thickness, no support, Rectilinear/ 40% Honeycomb, 0.3mm nozzle, and 1.75mm filament:
0.2 Layers, 0.42 wide “wall” thickness, no support, Rectilinear/ 40% Honeycomb, 0.3mm nozzle, and 1.75mm filament:
0.3 Layers, 0.42 wide “wall” thickness, no support, Rectilinear/ 40% Honeycomb, 0.3 nozzle, and 1.75mm filament:
0.1 Layers, 0.42 wide “wall” thickness, pillars support, Rectilinear/ 40% Honeycomb, 0.3 nozzle, and 1.75mm filament:
Auto level with my current g-code to use my magnetic z probe, 0.1 Layers, 0.42 wide “wall” thickness, no support, Rectilinear/ 40% Honeycomb, 0.3 nozzle, and 1.75mm filament:
I will add one here and there depending on how much time I have to test my setup. I would take it as a base and adjust to make it your setup. you will need to adjust nozzle size and your filament size.